Rigol MSO/DS1000Z Series Instrukcja Użytkownika Pobierz pdf (Strona 4)

-3-

安装工具 Installation Tool

推荐使用 PH2 号头十字改锥。PH2 Phillips Screwdriver (recommended).

安装空间 Installation Space

本机架安装到机柜内须满足如下要求：

 机柜必须为 19 英寸标准机柜。

 机柜至少有 4U 的空间（177.8 mm）。

 机柜内深度至少 180 mm。

仪器上架后的尺寸如下图所示。

The following requirements must be fulfilled by the machine cabinet in which the

instrument is mounted.

 The machine cabinet must be a standard 19-inch one.

 At least 4U (177.8 mm) space should be provided by the machine cabinet.

 The depth inside the machine cabinet should not be less than 180 mm.

The dimension of the instrument after being installed is as shown below.

1 2 3 4 5 6 7 8

Brak uwag

Rigol MSO/DS1000Z Series Instrukcja Użytkownika Strona 4